[Bond-users] Can't compile bonddb

Colin Close itchka at compuserve.com
Wed May 9 19:47:13 EDT 2007


Hi Ibrahim,

I had something similar but I can't for the life of me remember how I 
fixed it.
This could be a library path issue try running ldd 
/usr/local/bin/bondfrontend.
If it finds all the libraries then you'll have to try strace. It may be 
necessary to add the locations of your libraries to /etc/ld.so.conf and 
run ldconfig. After that I am afraid you are on your own> Bear in mind 
that if you have downloaded from svn the build could be  broken at his time.

Best,

Colin Close


Ibrahim Shaame wrote:
> I have run the bondfrontend, but now I get a segmentation fault, which 
> is apparently caused by wxGTK-2.6.3. I put back an older version 
> (wxGTK-2.4.2), installed a new copy of bond, ran scons and scons 
> install. But still I get the same message:
> **************************************
> ================================================================================
> Reading configuration file /etc/bondfrontend.conf.
> Connecting to database: dbname=zanzibar user=ibrahim host=localhost
> Libary /usr/local/lib/libbonddb2_pgsql.so successfully loaded.
> Connection to the database established successfully.
>  <src/uiplugin.c:161 plugin_create();> 
> prec=/opt/databases/pgsql/lib:/opt/myapps/wxGTK-2.6.3/lib
> checking directory/opt/databases/pgsql/lib/
>  <src/uiplugin.c:161 plugin_create();> prec=/opt/myapps/wxGTK-2.6.3/lib
> checking directory/opt/myapps/wxGTK-2.6.3/lib/
> Segmentation fault
> ibrahim at AMD_2400:/dwnlds/databases/bond/bond/examples$
>
> ******************************************
> Any hint ?
>
> Ibrahim
>
>
> On 5/9/07, *Colin Close* <itchka at compuserve.com 
> <mailto:itchka at compuserve.com>> wrote:
>
>     Hi Ibrahim,
>
>     Take a look in /usr/local/bin and /usr/local/lib it should all be
>     there.
>
>     Cest
>
>     Colin Close
>
>     Ibrahim Shaame wrote:
>     > Hi,
>     >    I have created the symlinks and scons does not give any error
>     > messages anymore. So I have run scons and scons install on both
>     bonddb
>     > and bond. But then I don't seem to undertand where the applications
>     > are installed ( as scons does not give you a choice of where to
>     > install the application, as it the case with ./configure).  I  have
>     > not been able to run bond. Am I missing something?
>     > Thanks again for your patience
>     > Ibrahim
>     >
>     > On 5/8/07, *Colin Close* < itchka at compuserve.com
>     <mailto:itchka at compuserve.com>
>     > <mailto:itchka at compuserve.com <mailto:itchka at compuserve.com>>>
>     wrote:
>     >
>     >     Hi Ibrahim,
>     >
>     >     I didn't touch scons I edited the source. The file you need
>     to hack in
>     >     Bond is pgsql/binding_pgsql.c; I simply pre-pended the path
>     to my
>     >     includes to libpq-fe.h.
>     >     I didn't do it with scons because its not possible (well, not
>     >     simple) to
>     >     get scons to accept environment variables from the shell
>     although I
>     >     believe this can be done.
>     >     With regard to libraries thats fixable with a symbolic link.
>     If you
>     >     don't know this then "man ln" will give you some help.
>     >     Before I get jumped on I must say that this is a very bad
>     way of doing
>     >     things and it really should be sorted via the build system.
>     The old
>     >     configure/make build system had mechanisms for getting round
>     these
>     >     kind
>     >     of difficulties scons however is much more disciplined but
>     has the
>     >     advantage of being blisteringly fast.
>     >
>     >     Best
>     >
>     >     Colin Close
>     >
>     >
>     >
>     >     Ibrahim Shaame wrote:
>     >     > Yes, my postgresql is not at a standard location. Now how
>     can I
>     >     tell
>     >     > scons to go and find my postgresql libs and include files. I
>     >     tried to
>     >     > check the SConstruct file but could not get a clue.
>     >     > Ibrahim
>     >     >
>     >     >
>     >     > On 5/7/07, *Colin Close* < itchka at compuserve.com
>     <mailto:itchka at compuserve.com>
>     >     <mailto:itchka at compuserve.com <mailto:itchka at compuserve.com>>
>     >     > <mailto:itchka at compuserve.com
>     <mailto:itchka at compuserve.com> <mailto:itchka at compuserve.com
>     <mailto:itchka at compuserve.com>>>>
>     >     wrote:
>     >     >
>     >     >     Hi,
>     >     >
>     >     >     I had similar problems, you may find that your OS puts
>     the psql
>     >     >     includes
>     >     >     in a different place that bond expects.  Mine is in two
>     >     places on
>     >     >     Mandriva /usr/include/pgsql/libpq which has a single
>     include
>     >     file and
>     >     >     /usr/include/pgsql/server/libpq which contains the ones
>     >     required to
>     >     >     compile Bond.
>     >     >     I patched the offending files but there are probably more
>     >     elegant
>     >     >     ways.
>     >     >     Note that you will have the same problem with Papyrus.
>     >     >
>     >     >     Colin Close
>     >     >     itchka at compuserve.com <mailto:itchka at compuserve.com>
>     <mailto:itchka at compuserve.com <mailto:itchka at compuserve.com>>
>     >     <mailto: itchka at compuserve.com
>     <mailto:itchka at compuserve.com> <mailto:itchka at compuserve.com
>     <mailto:itchka at compuserve.com>>>
>     >     >
>     >     >
>     >     >
>     >     >     jasen at tyreal.treshna.com
>     <mailto:jasen at tyreal.treshna.com> <mailto:jasen at tyreal.treshna.com
>     <mailto:jasen at tyreal.treshna.com>>
>     >     <mailto: jasen at tyreal.treshna.com
>     <mailto:jasen at tyreal.treshna.com>
>     >     <mailto:jasen at tyreal.treshna.com
>     <mailto:jasen at tyreal.treshna.com>>> wrote:
>     >     >     >
>     >     >     > On Mon, May 07, 2007 at 10:17:27PM +0200, Ibrahim
>     Shaame
>     >     wrote:
>     >     >     >
>     >     >     >> I have downgraded the scons and now I get a lot or
>     error
>     >     >     messages. The
>     >     >     >> following is just a part of it. I guess  there is a
>     >     problem of
>     >     >     a header file
>     >     >     >> not found, maybe?
>     >     >     >>
>     >     >     >
>     >     >     > was there a warning before the errors ?
>     >     >     >
>     >     >     >
>     >     >     >> pgsql/binding_pgsql.c: At top level:
>     >     >     >> pgsql/binding_pgsql.c:659: error: syntax error
>     before '*'
>     >     token
>     >     >     >> pgsql/binding_pgsql.c: In function
>     `_db_cachedefaultvalue':
>     >     >     >> pgsql/binding_pgsql.c:663: error: `l' undeclared (first
>     >     use in this
>     >     >     >> function)
>     >     >     >>
>     >     >     >
>     >     >     > have you installed libpq-dev ?
>     >     >     > (or if you don't want posgres support compile with scons
>     >     >     POSTGRES=0 ... )
>     >     >     >
>     >     >     >
>     >     >     >
>     >     >     >
>     >     >     > _______________________________________________
>     >     >     > Bond-users mailing list
>     >     >     > Bond-users at hcoop.net <mailto:Bond-users at hcoop.net>
>     <mailto:Bond-users at hcoop.net <mailto:Bond-users at hcoop.net>>
>     >     <mailto: Bond-users at hcoop.net <mailto:Bond-users at hcoop.net>
>     <mailto:Bond-users at hcoop.net <mailto:Bond-users at hcoop.net>>>
>     >     >     > http://hcoop.net/cgi-bin/mailman/listinfo/bond-users
>     <http://hcoop.net/cgi-bin/mailman/listinfo/bond-users>
>     >     <http://hcoop.net/cgi-bin/mailman/listinfo/bond-users>
>     >     >     >
>     >     >     >
>     >     >
>     >     >
>     >     >     _______________________________________________
>     >     >     Bond-users mailing list
>     >     >     Bond-users at hcoop.net <mailto:Bond-users at hcoop.net>
>     <mailto: Bond-users at hcoop.net <mailto:Bond-users at hcoop.net>>
>     >     <mailto:Bond-users at hcoop.net <mailto:Bond-users at hcoop.net>
>     <mailto:Bond-users at hcoop.net <mailto:Bond-users at hcoop.net>>>
>     >     >     http://hcoop.net/cgi-bin/mailman/listinfo/bond-users
>     >     >
>     >     >
>     >     >
>     >    
>     ------------------------------------------------------------------------
>     >     >
>     >     > _______________________________________________
>     >     > Bond-users mailing list
>     >     > Bond-users at hcoop.net <mailto:Bond-users at hcoop.net>
>     <mailto:Bond-users at hcoop.net <mailto:Bond-users at hcoop.net>>
>     >     > http://hcoop.net/cgi-bin/mailman/listinfo/bond-users
>     >     >
>     >
>     >
>     >     _______________________________________________
>     >     Bond-users mailing list
>     >     Bond-users at hcoop.net <mailto:Bond-users at hcoop.net>
>     <mailto:Bond-users at hcoop.net <mailto:Bond-users at hcoop.net>>
>     >     http://hcoop.net/cgi-bin/mailman/listinfo/bond-users
>     <http://hcoop.net/cgi-bin/mailman/listinfo/bond-users>
>     >
>     >
>     >
>     ------------------------------------------------------------------------
>     >
>     > _______________________________________________
>     > Bond-users mailing list
>     > Bond-users at hcoop.net <mailto:Bond-users at hcoop.net>
>     > http://hcoop.net/cgi-bin/mailman/listinfo/bond-users
>     >
>
>
>     _______________________________________________
>     Bond-users mailing list
>     Bond-users at hcoop.net <mailto:Bond-users at hcoop.net>
>     http://hcoop.net/cgi-bin/mailman/listinfo/bond-users
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Bond-users mailing list
> Bond-users at hcoop.net
> http://hcoop.net/cgi-bin/mailman/listinfo/bond-users
>   





More information about the Bond-users mailing list